The pier unloading pneumatic conveying system is placed at the port, dock or bulk material storage point. The material is sucked up by negative pressure and sent to the receiving point such as the silo through corresponding equipment. This equipment does not require special modification for ships and vehicles in bulk, and is currently an ideal equipment for bulk cement, alumina, fly ash, grain, chemical and other raw materials transportation.
The dock unloading pneumatic conveying equipment is mainly located at the port, dock or bulk material storage point. The high-vacuum Roots vacuum pump is used as the air source. The bulk material is sucked into the separator through the suction nozzle. Directly discharged into the atmosphere, the deposited bulk material is unloaded into the bulk car through the dragon below the separator, and the ship is transported out or sent to the silo for collection by feeding equipment such as a warehouse pump. The suction nozzle adopts the ordinary double-cylinder nozzle or directly adopts the advanced full hydraulic control method with a loose head according to the user's requirements. It can swing freely and is very easy to operate. The feeding method can also adopt various conveying methods such as mechanical conveying or pneumatic conveying according to the needs of users.
System device features:
This system is a pneumatic conveying system that uses Roots vacuum pump as the air source to continuously convey materials. This system has the centralized conveying of bulk materials from multiple places to one place; the entire conveying system is completely sealed and is in the entire conveying process. In a closed environment with negative pressure, there is basically no dust phenomenon outside, reliable transportation, and simple equipment configuration; reliable performance of the entire conveyor, dust-free operation, small loss of loading and unloading materials, and high installation efficiency.