The widely used material sealing pump unloading device used in the pneumatic conveying of fly ash is a kind of equipment that is loaded into the car body through a material warehouse. This type of unloading has various forms. Generally, There are two types of unloading, one is the direct conveyance of the tank truck by the storage side straight pipe through the material sealing pump, and the other is the direct conveying method at the bottom of the silo. These two forms of construction are very important for the layout of the material sealing pump site. We have many years of technical construction experience from Fucheng Machinery to explain to you.
A discharge system is built by the side of the material seal pump silo. This type of construction is to install an inflatable chute at the storage side discharge port. In order to fluidize the cement, the angle of the straight pipe must be greater than 42 °. After the bulk cement flows out of the storage side outlet, it flows into the container through its straight pipe and telescopic pipe by its own weight. This construction plan is to send good dry powder materials directly to the side. By constructing the equipment, the unloading truck performs this form of unloading at the side of the silo, and the vehicle is directly filled at this location. Easy access after loading.
For manufacturers with a tight construction site for the material seal pump, we can install the discharge device of the material seal pump to the bottom of the silo. In this way, by combining the practical problems of dry powder material manufacturers, the discharge port is very close to the discharge truck, and During the conveying process, the loading of the silo will be faster than the loading of the side under pressure. However, this form of investment requires a good arrangement of the layout of the site and the order of the vehicles. The layout of the site achieves the effect of unloading. This form of investment has less investment and fast loading. It is especially suitable for the bottom of the warehouse for homogenization or packaging of the warehouse, while the warehouse side carries out the bulk production process at the same time. Welcome to call technical engineers for more consultation on the effect of pneumatic conveying and discharging.