Overview of dry ash bulk machine
The dry ash bulk loading machine is composed of five main parts, such as a bulk head lifting device, a blanking control system, and a dust collection system. It is mainly used to load dry powdery and granular materials into dry cars under dry ash removers, ash buckets or ash storages. GSZ series dry ash bulk loading machine has automatic control function, strong adaptability to the site, no dust out, full material indication, etc. Widely used in bulk cement and building materials, metallurgy, coal, chemical, food and other industries.
Dry ash bulk machine is composed of bulk head, telescopic joint, telescopic bag, manual lifting control part, automatic lifting control part, hair dryer, wire rope, reducer, electric control cabinet and other parts. The output can reach up to 200 tons / hour.
Working principle of dry ash bulk machine
Operation principle of dry ash automobile bulk machine After the carrier is in place, the semi-automatic control mechanism is adopted to lower the retractable bulk head. When the bulk head is tightly attached to the upper part of the ash inlet of the vehicle (the bulk head is lined with a rubber layer and tightly sealed to the tanker truck), the automatic control mechanism is turned on, and then the upper feeder is started and begins to blank into the car. The material flows into the material tank by its own weight through the discharge tube, and the dust between the material discharge tube and the dust suction tube is discharged into the dust receiving bag or ash storehouse through the dust suction fan; when the material tank is full, the level gauge sends an induction signal, and the corresponding The electric and pneumatic control system automatically closes the upper feeder; after 4 to 6 seconds, the dust extraction fan is automatically turned off, the bulk head is automatically lifted, and the unloading process is completed.
1. Bulk machine is not suitable for materials with sticky, corrosive, and temperature higher than 150 ℃.
2. The loading speed of the automobile bulk machine is determined by adjusting the discharge valve and the capacity of the conveying equipment. In general, large cars, trains and ships need to be fast. About 120-300 tons / hour, the speed of ordinary bulk cars is slower, about 60-100 tons / hour.
3. Pneumatic valve should be used when there is compressed air source (pressure about 0.4Mpa) in the work place. Users with special needs can be specially designed and manufactured.
4. Automobile bulk machine is divided into two forms of control: control cabinet control and button station control. Please specify the requirements when ordering.
| model || SZJ60 || SZJ100 || SZJ200 |
| Loading capacity (t / h) || 60 || 100 || 200 |
| Feeding tube diameter (mm) || Φ300 |
| Suction pipe diameter (mm) || Φ108 |
| Bulk head travel (mm) || 1500-2500 |
| Lifting speed (m / min) || 8 |
1. The internal expansion tube of the dry ash bulk machine is composed of multiple sections of metal casing, which is resistant to wear and has a long service life;
2. The retractable outer tube of the bulk machine uses polyester canvas, which is resistant to wear and folding.
3. The air-pressure level gauge is used to detect the material level in the car. The level gauge uses a separate type, which is sensitive and reliable and convenient when adjusting according to the size of the vehicle;
4. Since the bulk head and the inner casing are all metal structures, the lifting drive is stable, and there is no flutter and skew of the bulk head during loading.
Gongyi Fucheng Machinery Factory is a professional production base of pneumatic conveying and ash storage equipment. Its unit is devoted to the development and development of powder conveying equipment, vacuum pressure release valves, pneumatic conveying equipment, automobile bulk machines and other energy-saving and environmental protection equipment. Phone: 0371-64560789!